Brodit Galaxy Tab A11+/A9+ Active holder fixed ins
Keep your battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. For fixed installation. The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has two USB ports: QC 3.0A + 2.4A. It is easy to slide the device in place in the holder so it connects to the charging, and to take it out of the holder when leaving the vehicle. The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended. An installation of a tablet onto a vehicle’s dashboard is always done on the customer’s own responsibility. Brodit recommends to use tablets on the car’s headrest, installed onto a Brodit headrest mount. Tilt swivel for easy adjustment This product is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. Mounting plate 42x50 mm with 4 mm AMPS-holes Properties Height 189 mm Width 243 mm Depth 41 mm Volume 1883 cm³ Weight 457 g Discreet hard-wire installation with hidden cables Keep your device in a charging cradle and you will always have a freshly charged battery! This holder features a straight cord for connection inside the vehicle´s dashboard. Connect the power cable with a 7A fuse. Professional installation recommended. Input voltage 12-24V Input current 7A Max Output voltage Output USB-C: DC 5V/3A, 9V/3A, 12V/2,5A, 15V/2A, 20V/1,5A, 30W Max, PPS (DC 3.3-11V/3A) USB-C Charging Protocols: PPS, PD 3.0, PD 2.0, QC 3.0, QC 2.0, AFC, FCP, PE 2.0, BC1.2, DCP, Apple 2.4A Output USB-A: DC 5V/3A, 9V/2A, 10V/2A, 12V/2.5A 30W Max USB-A Charging Protocols: QC 3.0, QC 2.0, AFC, FCP, HVSCP, PE 2.0, BC1.2, DCP, Apple 2.4A Input connections 2-pin connector to open ends Output connections USB-A, USB-C Rated power 60W Input & output protection Overvoltage, Low-voltage, Overcurrent, Short-circuit, Over-temperature Input cable length - Output cable length - Operating temperature 0℃ ~ +40℃ Approvals CA PROP 65, CB+CE-Safety, CE-EMC, ECE, FCC-SDOC & IC-VOC, NOM, REACH SVHC 241, RoHS, UKCA-EMC, UKCA-Safety Charger dimensions 12,4cm(L)*3cm(W)*2,6cm(H)
Price (inc. VAT) 149,00 €
